Find your dealer
Back to Hedge cutter 
| EPM 500 | ||
|---|---|---|
| Minimum track distance | mm | 1.800 |
| Minimum Tractor mass | Kg | 2.300 |
| Minimum power required by the Tractor | CV | 80-120 |
| Three-point hitch | ||
| Height at rest | mm | 2.375 |
| Width at rest | mm | 2.500 |
| Depth at rest | mm | 1.170 |
| Machine’s mass | Kg | 750 |
EPM 500
Brush trimmer arm with an horizontal reach of 5 metres max. This model is suitable for shredding grass, leaves and shrubs (max 3/4 cm in diameter). Suitable for public and private green maintenance work, road ditches and embankments and for strictly agricultural use. The machine is equipped as standard with the DCH 100 shredding head.
Models available
500
Recommended horse power
80-120 CV
Good for
Hedge cutter
Standard Equipment
Features
SCHEDA TECNICA
GRUPPO DI TRINCIATURA
| EPM 500 | ||
|---|---|---|
| Working width | mm | 1.000 |
| Group rotation angle | - | 190° |
| Cutting diameter | mm | 410 |
| Bare rotor diameter | mm | 115 |
| Rotor thickness | mm | 10 |
| Y-articulated knives | - | 40 |
| Rotary hammers for wood | - | 20 |
| Articulated hammers | - | 20 |
| Rotor rotation speed | g/m | 3.000 |
| Shaft transmission type of rotor | - | Direct |
| Rear roller diameter (tamper roller) | mm | 115 |
CIRCUITO DI POTENZA
| EPM 500 | ||
|---|---|---|
| PTO rotation speed | - | 540 |
| Double pump features | - | 36 |
| Gearbox characteristics | - | 1/3.4 |
| Power to the rotor | CV | 35 |
| Pump flow rate | l/ min | 67 |
| Tank capacity | l | 120 |
| Chydraulic circuit filter characteristics | - | 25 |
Optional
Floating Head 1,20m
Electric controls
Light kit
Wood rotor
Request Information
Request Information
